DETECTOR TESTS

Please note these are mainly test's of older detectors, i will be creating another test bed and test more modern detectors in the near future

 

A few of the questions I am asked on a daily basis is  ''How deep does it go''? - '' What's it like near iron?'' ,does it reject coke? Does it work on a beach e.t.c

Which detector is the best?. 
Most detectors fit in to the ''mid range area'' where
they are all very similar.

However some excel in certain ways , others are not too good.

Years ago some of you may remember i created a test bed and tested dozens of detectors, it was very popular back then, since then everyone seems to have test on youtube and the like.


There are many more detectors on the market nowadays and there is almost too much choice!

There are many coils for sale now to suite most models and i will also be testing as many coils as possible so you can see what difference (if any) changing a coil makes

I do not think there is one detector out here that does everything perfectly, that's probably why a lot of us have several detectors

 

All detectors are set up to be stable and reject nails , small iron, and Coke  (if possible) which is what suits most people.

 

Quite a few detectors would give better results  if I ran them ''over sensitive'' or in ' All metal'' making them very unstable but I would not normally do this in the field.

 

Most of the targets have been buried for at least 15 Years

Most detectors will go a bit deeper if the ground has been undisturbed for 100's or 1000's of years.

But of course these conditions cannot be reproduced.

 

Some makes of detector work better on some fields than on others, whilst some makes of detector work anywhere without picking and choosing.

Some detectors may not be very deep but are very fast responding so they would be better in iron infested sites.

But I have found if you have a detector that is not the fastest at responding you just simply slow down.

Depth is not the 'be all and end all' - but it helps, the more powerful the detector the more it normally finds.

I will also not be holding back on my thoughts on every detector and the pro's and cons of each.

Beginners don't let any of my comments put you off any detector, all the tests are extreme, 90% of detectors will find 90% of what you walk over

Test Bed Pictures

High Conductive Depth Tests

Low Conductive Depth Tests

Target Among Iron Tests

Very Low Conductive Target Tests

Overall Performance Combined Results

Individual Detector Tests/Results/Comments